English 
No.5, East Ningbo Road, Taicang, Jiangsu
| Materials | Steel, Aluminum alloy |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size (≤800*800); | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 80kg at the lowest position and Max ≈ 40kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
| Pneumatic lift table leg - Four-direction sliding table frame & 360° rotating flange chassis | |
| Product introduction | |
| Type | 66 61 002 |
| Characteristic | Sliding table frame size: X-direction 545mm, Y-direction 460mm Sliding stroke: X direction 185mm, Y direction 150mm Base plate: Steel double-layer flange chassis, 360° stepless rotation (Φ240mm) |
| color | Black-RAL9005 |
| Height | 355-740（±5mm） |
| Stroke | 385±3mm |
| Materials | Steel |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size (≤800*800); | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 80kg at the lowest position and Max ≈ 40kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
| Pneumatic lift table leg - Fixed table frame & large chassis | |
| Product introduction | |
| Type | 66 63 005 |
| Characteristic | Fixed table frame size: X-direction 460mm, Y-direction 350mm Base plate: Flowforming chassis (Φ500mm) |
| color | Black-RAL9005 |
| Height | 343-743（±3mm） |
| Stroke | 400±3mm |
| Materials | Steel |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size (≤800*800); | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 80kg at the lowest position and Max ≈ 40kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
| Pneumatic lift table leg - Four-direction sliding table frame &large chassis | |
| Product introduction | |
| Type | 66 63 006 |
| Characteristic | Sliding table frame size: X-direction 545mm, X-direction 460mm Sliding stroke: X direction 185mm, Y direction 150mm Base plate: Flowforming chassis (Φ500mm) |
| color | Black-RAL9005 |
| Height | 355-750（±5mm） |
| Stroke | 395±3mm |
| Materials | Steel |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size (≤800*800); | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 80kg at the lowest position and Max ≈ 40kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
| 2023 New Model, Aluminum pneumatic lift table leg - Four-direction sliding table frame | |
| Product introduction | |
| Type | 66 67 001-Black 66 67 003-Grey |
| Characteristic | Sliding table frame size: X-direction 545mm, Y-direction 460mm Sliding stroke: X direction 185mm, Y direction 150mm Base plate: 6-hole steel flange chassis (Φ240mm) |
| color | Black-RAL9005, Grey-RAL 9006 |
| Height | 355-730（±5mm） |
| Stroke | 375±3mm |
| Materials | Main parts: aluminum profile, Chassis: steel |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size (≤800*800); | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 100kg at the lowest position and Max ≈ 50kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
| 2023 New Model, Aluminum pneumatic lift table leg - Four-direction sliding table frame & 360° rotating flange chassis | |
| Product introduction | |
| Type | 66 67 002-Black 66 67 004-Grey |
| Characteristic | Sliding table frame size: X-direction 545mm, Y-direction 460mm Sliding stroke: X direction 185mm, Y direction 150mm Base plate: Steel double-layer flange chassis, 360° stepless rotation (Φ240mm) |
| color | Black-RAL9005, Grey-RAL 9006 |
| Height | 360-735（±5mm） |
| Stroke | 375±3mm |
| Materials | Main parts: aluminum profile, Chassis: steel |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size (≤800*800); | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 100kg at the lowest position and Max ≈ 50kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
| Pneumatic lift table leg - Double leg | |
| Product introduction | |
| Type | 66 64 001 |
| color | Black-RAL 9005 |
| Height | 360-745（±5mm） |
| Stroke | 385±3mm |
| Materials | Steel |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size; | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 160kg at the lowest position and Max ≈ 80kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
| Materials | Steel, Aluminum alloy |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size (≤800*800); | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 80kg at the lowest position and Max ≈ 40kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
| Pneumatic lift table leg - Four-direction sliding table frame & 360° rotating flange chassis | |
| Product introduction | |
| Type | 66 61 002 |
| Characteristic | Sliding table frame size: X-direction 545mm, Y-direction 460mm Sliding stroke: X direction 185mm, Y direction 150mm Base plate: Steel double-layer flange chassis, 360° stepless rotation (Φ240mm) |
| color | Black-RAL9005 |
| Height | 355-740（±5mm） |
| Stroke | 385±3mm |
| Materials | Steel |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size (≤800*800); | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 80kg at the lowest position and Max ≈ 40kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
| Pneumatic lift table leg - Fixed table frame & large chassis | |
| Product introduction | |
| Type | 66 63 005 |
| Characteristic | Fixed table frame size: X-direction 460mm, Y-direction 350mm Base plate: Flowforming chassis (Φ500mm) |
| color | Black-RAL9005 |
| Height | 343-743（±3mm） |
| Stroke | 400±3mm |
| Materials | Steel |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size (≤800*800); | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 80kg at the lowest position and Max ≈ 40kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
| Pneumatic lift table leg - Four-direction sliding table frame &large chassis | |
| Product introduction | |
| Type | 66 63 006 |
| Characteristic | Sliding table frame size: X-direction 545mm, X-direction 460mm Sliding stroke: X direction 185mm, Y direction 150mm Base plate: Flowforming chassis (Φ500mm) |
| color | Black-RAL9005 |
| Height | 355-750（±5mm） |
| Stroke | 395±3mm |
| Materials | Steel |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size (≤800*800); | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 80kg at the lowest position and Max ≈ 40kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
| 2023 New Model, Aluminum pneumatic lift table leg - Four-direction sliding table frame | |
| Product introduction | |
| Type | 66 67 001-Black 66 67 003-Grey |
| Characteristic | Sliding table frame size: X-direction 545mm, Y-direction 460mm Sliding stroke: X direction 185mm, Y direction 150mm Base plate: 6-hole steel flange chassis (Φ240mm) |
| color | Black-RAL9005, Grey-RAL 9006 |
| Height | 355-730（±5mm） |
| Stroke | 375±3mm |
| Materials | Main parts: aluminum profile, Chassis: steel |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size (≤800*800); | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 100kg at the lowest position and Max ≈ 50kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
| 2023 New Model, Aluminum pneumatic lift table leg - Four-direction sliding table frame & 360° rotating flange chassis | |
| Product introduction | |
| Type | 66 67 002-Black 66 67 004-Grey |
| Characteristic | Sliding table frame size: X-direction 545mm, Y-direction 460mm Sliding stroke: X direction 185mm, Y direction 150mm Base plate: Steel double-layer flange chassis, 360° stepless rotation (Φ240mm) |
| color | Black-RAL9005, Grey-RAL 9006 |
| Height | 360-735（±5mm） |
| Stroke | 375±3mm |
| Materials | Main parts: aluminum profile, Chassis: steel |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size (≤800*800); | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 100kg at the lowest position and Max ≈ 50kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
| Pneumatic lift table leg - Double leg | |
| Product introduction | |
| Type | 66 64 001 |
| color | Black-RAL 9005 |
| Height | 360-745（±5mm） |
| Stroke | 385±3mm |
| Materials | Steel |
| Surface treatment | Powder spraying |
| Attention | |
| 1. Recommend installing panels of appropriate size; | |
| 2. There is an air spring inside, please do not press quickly or forcefully. It is advisable to slowly and uniformly press down; | |
| 3. The static bearing capacity of the product is Max ≈ 160kg at the lowest position and Max ≈ 80kg at other heights. Do not stand or jump on the product, do not apply impact or lateral force; | |
| 4. The standard temperature range for the product is -15 ℃~+45 ℃； | |
| 5. During driving, please try to lower the lifting table to the lowest position or lower the height as much as possible。 |
